|
|
Nylon which balance well holds suppleness,
strength and handiness. Feeling at rest in all
fishing, being most popular line
material.
|
|
|
Being hard, and difficult to scratch, lowness of early ductility is a special
feature of fluorocarbon. With superior resistance to abrasiveness
and where good quality of sensitivity is required
it is optimum.
|
|
|
In comparison with nylon line of the same number, the PE
has a tensile strength of 2.5~3 time more. It is the fixed turn line
with aim of
beginning the jig and GT fishing
|
|
|
The same field thread as the usual PE line is used,
but raising density to a greater extent, it is the new material which
raises tensile strength.
|
|
|
As for the MAX power the powerful field thread which
has the tensile strength of 1.3~1.5 time in comparison
with the usual PE line.
|
|
|
With an abrasion proof efficiency and durability
2 times more than the MAX power
material, by administering special coating. The weak
point of the PE line was overcome, it is the PE line
which is the optimum line for casting.
|
|
|
PVC is the polyvinyl chloride which is known as
砺inyl chloride. Being a strong, process coloration
the material is used in coating of the fly
line
|
|
|
The VEP manufacturing method which improves resistance
abrasiveness from production stage of the nylon field
thread. The super resistance abrasiveness, 20 times
that of the usual nylon line.
|
|
|
With VARIVAS individual AIRS manufacturing method,
maintaining tensile strength and diameter complete the
floating 8 hole hollow nylon lines.
|
|
|
High density molecular bond manufacturing method in
order to produce a stronger nylon line (VA-G
manufacturing method).
|
|
|
Super fluorine coating processing provides a water repelling
characteristic, with a protecting film of
fluorine on the line surface. The deterioration from water absorption of the line is held down, also
casting distance rise and abrasion proof efficiency
improve.
|
|
|
With the polymer the line surface gets a super tough coating
processing which is overturned. The line deterioration
with water absorption is held down, abrasion proof
efficiency, casting distance raises.
|
|
|
Individual sinking processing which tears the
boundary tension of the water surface, sinks the line
smoothly. The line enters into underwater quickly even
in the circumstance where the water surface has become
rough with the wind and the wave etc
|
|
|
UV-CUT processing which protects the line from the
sunlight. The special protecting film which is
administered to the line surface blocks the
ultraviolet ray, prevents the deterioration of the
line.
|
|
|
The fluorescent colour which raises the visibility of
the line markedly.
|
|
|
A non stress coating process which is
administered to the line for stress reduction such as
water absorption, ultraviolet ray and salinity. It
contributes to also strength retention.
|
GANOA ABSOULTE Fluoro Carbon
